This robot arm picks with bat sonar! 🦇
When a bat echolocates, the tiny difference in timing and volume between its two ears gives it direction from a single ping.
Recreating that on a robot normally means several receivers and amplifiers, which gets expensive fast.
This build by
@karolina_dubiel goes the other way.
One HC-SR04, the $3 ultrasonic sensor from every Arduino starter kit, firing a 40 kHz burst and returning a single number: distance.
How do you get direction out of a sensor that only measures distance? You move the sensor. A scanning routine sweeps the arm across a grid, pings at each spot, and tags every reading with the current joint angles. One cheap sensor plus known geometry rebuilds a height map of the table.
Then it becomes a precision problem. Under gravity the shoulder and elbow kept stopping short, smearing the map by up to 13 mm. The fix: tighten the joint tolerance from 0.9° to 0.26°, and re-command each joint with its measured shortfall, up to six tries, until it actually lands.
And because the beam is a ~15° cone, edges blur into neighboring cells, so a classifier only accepts a 5×5 cm cell when readings agree across multiple sweeps and the median height matches the object.
That’s just brilliant. 😮💨
🔗 Here's the project:
Be like Karolina, build, build... and build! 🦾
~~
♻️ Join the weekly robotics newsletter, and never miss any news →