Register and share your invite link to earn from video plays and referrals.

sendcutsend
@sendcutsend
Custom sheet metal and CNC parts, fast. Manufacturing the future 🇺🇸
Joined June 2018
130 Following    18.3K Followers
Bending some .250" thick HRP&O The tooling in the video is a 0.125" radius punch and 1.175" width die. The die creates a zone where interior geometry (like holes or slots) can distort. That zone is roughly half the die width from the bend centerline will stretch. Bend reliefs are strongly recommended at 0.187" and thicker to keep the corners from tearing; a practical minimum is a notch at least 0.125" wide with depth equal to the bend radius plus 0.270". HRP&O forms cleanly because the mill scale has already been pickled off, and the inside radius lands around 1–1.5× thickness. The force does leave deeper witness marks than lighter gauges.
Show more