注册并分享邀请链接,可获得视频播放与邀请奖励。

sendcutsend
@sendcutsend
Custom sheet metal and CNC parts, fast. Manufacturing the future 🇺🇸
加入 June 2018
130 正在关注    18.3K 粉丝
Bending some .250" thick HRP&O The tooling in the video is a 0.125" radius punch and 1.175" width die. The die creates a zone where interior geometry (like holes or slots) can distort. That zone is roughly half the die width from the bend centerline will stretch. Bend reliefs are strongly recommended at 0.187" and thicker to keep the corners from tearing; a practical minimum is a notch at least 0.125" wide with depth equal to the bend radius plus 0.270". HRP&O forms cleanly because the mill scale has already been pickled off, and the inside radius lands around 1–1.5× thickness. The force does leave deeper witness marks than lighter gauges.
显示更多
0
6
165
11
转发到社区