Oleg Kutkov 🇺🇦(@olegkutkov):Some people have been asking how I collected this data with a Fluke 115. It was an outdoor test, and I didn't have a proper multimeter data logger with me. I did, however, have my Fluke 115 measuring the current. So here's what I did: I recorded a reasonably steady video of the Fluke's display with my phone while commenting on what was happening at each stage of the test. Then I fed the video to @grok and asked it to extract the readings from the display, along with my voice comments, and put everything into a three-column CSV file (timestamp, reading, comment). Finally, I used the generated CSV data to create this plot.

2026.08.19 08:05

Some people have been asking how I collected this data with a Fluke 115. It was an outdoor test, and I didn't have a proper multimeter data logger with me. I did, however, have my Fluke 115 measuring the current. So here's what I did: I recorded a reasonably steady video of the Fluke's display with my phone while commenting on what was happening at each stage of the test. Then I fed the video to @grok and asked it to extract the readings from the display, along with my voice comments, and put everything into a three-column CSV file (timestamp, reading, comment). Finally, I used the generated CSV data to create this plot.

Oleg Kutkov 🇺🇦@olegkutkov

2026.08.18 22:02

Starlink V5 power consumption at different stages. Min: 7.9W; Med: 20.7W; Max: 44.2W